Polyether modified polydimethyl siloxane for improved slip, flow and leveling and mar resistance properties in solvent- and water-based coatings systems, 100 % active, VOC-free

  • Physical Characteristics

    AppearanceClear liquid
    Non-volatile contentN/A
    pH4.0 – 7.2 (aqueous solution 1 %)
    Density1.05 g/cm3 (25 °C)
    Viscosity70 – 150 mPa.s ISO 3219 (A) (25 °C)
    ColorGardner: Max. 3 ISO 4630
    Refractive IndexN/A
    Solvent(s)N/A

     

  • Features

    • Inhibits the formation of surface defects like craters and pin holes
    • Improves flow, leveling and slip properties of coatings
    • Broad compatibility with wide variety of binders

  • Applications

    • Coatings
      • General Industrial
      • Architectural
      • Automotive
      • UV-curable

  • Dosage

    The recommended dosage is 0.05 % to 0.5 % of the total weight of the formulation depending upon the binder system. The exact dosage should be experimentally determined.

  • Storage

    Protect from the effects of weathering and store at temperatures between 15 and 30 °C. In temperatures below 15 °C, Borchi® Gol 1474 may become hazy, show a hazy precipitate and may even solidify. This does not affect performance and can usually be recovered by storing the product at 25 °C or above 24 hours.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

     

    Read our blog for more information on choosing the right flow and leveling agent.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].

Flow & Leveling Products
View All Flow & Leveling Products