Solvent-free foam control agent for water-based paints

  • Physical Characteristics

    AppearanceOff white emulsion
    Chemical typeMineral Hydrocarbons and surface active materials
    Water miscibilityLow dispersibility
    FluidityViscosity not greater than 1500cPs @ 20° DIN 53019 100rpm
    CleanlinessNo particles after screening through a 400μm aperture screen
    Specific gravity @20°C 0.92 – 0.96 g/ml
    Active content~60 %

    *This information shows typical properties and does not constitute a specification.

  • Features

    • Excellent defoamer
    • Performs well over a wide range of pH values
    • Good at low concentrations
    • Effective over a wide range of temperatures
    • Helps with process productivity

     

     

  • Applications

    • Aqueous systems
    • Emulsion paints
    • Paper coatings
    • Adhesives

  • Dosage

    Borchi® Burst DFM 700 is usually added as received. The amount required depends of course on the particular application. A typical addition level would be between 0.1% and 0.5% in total depending on the severity of the foam problem. The optimum quantity and points of addition are determined by laboratory trials.

  • Storage

    Store in closed containers. Avoid extremes of temperature, keep between 5°C and 30°C. Avoid freezing and do not store in direct sunlight. Some phasing may occur during the storage period. Remixing will ensure the product is suitable for use.

  • Stability

    Product has a shelf life of 12 months, however during this time period some phasing may occur. Remixing will ensure the product is suitable for use.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].

Multimedia
Defoamers Products
View All Defoamers Products