| Appearance | Gray hazy liquid |
| Chemical type | Modified silicones, SVHC Label-free |
| Water miscibility | High dispersibility |
| Fluidity | Viscosity not greater than 2000cPs @ 20°C. DIN 53019 100rpm |
| Cleanliness | No particles after screening through a 400μm aperture screen |
| Specific gravity @20°C | 1.01 – 1.05 g/ml |
| Active content | ~100 % |
*This information shows typical properties and does not constitute a specification.
Borchi® Burst DFS 500 is usually added as received. It should be added in pigment grind or early on in the process to ensure the product is well incorporated. A typical addition level would be between 0.1% and 0.5% in total depending on the severity of the foam problem. The optimum quantity and points of addition are determined by laboratory trials.
Store in closed containers. Avoid extremes of temperature, keep between 5°C and 30°C. Avoid freezing and do not store in direct sunlight. Product has a shelf life of 12 months, however during this time period some phasing may occur. Remixing will ensure the product is suitable for use.
Please refer to our safety data sheet for information relating to product safety.
For chemical inventory status, please review section 15 of the current SDS.
Click here to access the SDS portal.
For additional regulatory information, please contact regulatory@milliken.com.
