Polyether modified polysiloxane additive for improved substrate wetting, flow and leveling properties in water- and solvent-based coatings systems

  • Physical Characteristics

    AppearanceLiquid, yellow
    Non-volatile content50%
    pHN/A
    Density1.02 g/cm³ DIN 51757 (20°C)
    Viscosity20 – 50 mPa.s DIN 53015 (23 °C)
    ColorHazen: Max. 150 ISO 6271
    Hydroxyl number NAN/A
    Refractive Index1.43 – 1.44 DIN 51423 (23 °C)
    Solvent(s)Dipropylene glycol monobutyl ether

  • Features

    • Lowers surface tension of a wide range of formulated systems
    • Inhibits the formation of surface defects
    • Use with Borchi® Gol LA 2 for better slip

  • Applications

    • Coatings
      • General Industrial
      • Decorative
      • UV-cured systems
      • Wood

  • Dosage

    The recommended dosage of Borchi® Gol LA 50 depends on the desired effect and the type of system. Suggested amounts range from 0.05 and 0.30 % based on total formulation.

  • Storage

    Protect from the effects of weathering and light. Store at temperatures between 5 and 30 °C. Once opened, containers should be resealed immediately after each removal of the product.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

     

    Read our blog for more information on choosing the right flow and leveling agent.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].

Flow & Leveling Products
View All Flow & Leveling Products