Zinc drier for solvent-based systems

  • Physical Characteristics

    AppearanceClear, colorless to yellowish liquid
    Metal contentZn: 11.70 – 12.30 % ISO 4619
    Non-volatile contentNA
    ViscosityMax. 120 mPa.s (20°C) ISO 3219 (A)
    Specific gravityNA
    Density0.950 – 0.990 g/cm³ DIN 51757 (20 °C)
    SolventWhite-spirit containing <1 % aromatics

  • Features

    • Secondary drier used in combination with primary driers (manganese, Borchi® OXY-Coat, Borchi® OXY-Coat 1310 or vanadium compounds)
    • Improves through-drying and film hardness
    • Prevents wrinkling and orange peel on paint film surface
    • Slightly increases dry time
    • Improves pigment wetting and dispersion
    • Increases gloss and color-fastness
    • Reduces grind time when added to formulation at early stage
    • Can be used in large amounts without discoloring film

  • Applications

    • Solvent-based systems based on alkyds and epoxy esters that dry by oxidation

  • Dosage

    The addition rate of zinc, calculated on the metal content per solid resin, is approx. 0.03 – 0.50 %. The exact amount required depends on the resin and used formulation and should always be determined in preliminary trials. Borchers® Deca Zinc 12 can be introduced during the grinding step to improve pigment wetting.

  • Storage

    Protect from the effects of weathering and store at temperatures between 5 and 30 °C.
    Once opened, containers should be resealed immediately after each removal of the product.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact regulatory@milliken.com.

Driers Products
View All Catalysts Products
View All Driers Products