Manganese drier in VOC-reduced and High-Solid coatings

  • Physical Characteristics

    AppearanceClear, middle-viscous, brown-red liquid
    Metal contentMn: 7.80 – 8.20 % ISO 4619
    Non-volatile contentNA
    ViscosityMax. 1500 mPa.s (20°C) ISO 3219 (A)
    Specific gravityNA
    Density0.980 – 1.020 g/cm³ DIN 51757 (20 °C)
    SolventFatty acid ester

     

  • Features

    • Highly effective oxidative drier
    • Promotes surface- and through-drying properties
    • Usually used in combination with other primary driers such as Borchi® OXY – Coat or Borchers® Deca Cobalt
    • High atmospheric humidity severely inhibits the effect of manganese

  • Applications

    • Conventional architectural paints
    • Wood coatings
    • Printing Inks
    • Industrial coatings based on resins that dry by oxidation

  • Dosage

    The typical usage level is 0.01 – 0.05 % manganese metal, based on binder solids. The exact amount depends upon the formulation and should always be determined in preliminary trials.

  • Storage

    Protect from the effects of weathering and store at temperatures between 5 and 30 °C. Once opened, containers should be resealed immediately after each removal of the product.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].

Driers Products
View All Catalysts Products
View All Driers Products