| Appearance | Clear, low-viscous brown liquid |
| Metal content | Fe: 7.30 – 7.70 % DIN 55901 |
| Non-volatile content | 52.00 – 64.00 % ISO 3251 (2 g, 3 h, 105 °C) |
| Viscosity | 10 – 60 mPa·s ISO 3219 (A) (20 °C) |
| Specific gravity | NA |
| Density | 0.940 – 0.980 g/cm³ DIN 51757 (20 °C) |
| Solvent | White-spirit containing <1 % aromatics |
• Primary drier
• Improves through-drying
• Develops full effect at high temperatures (> 150 °C)
• Rapid surface drying
• Acts as an adhesion promoter in anti-corrosion coatings
In our experience, the percentage addition of iron, calculated on the metal content per binder (solid), is approx. 0.1 – 1.0 % Fe. The exact amount required depends on the binder used.
Protect from the effects of weathering and store at temperatures below 50 °C.
Once opened, containers should be resealed immediately after each removal of the product.
Please refer to our safety data sheet for information relating to product safety.
For chemical inventory status, please review section 15 of the current SDS.
Click here to access the SDS portal.
For additional regulatory information, please contact regulatory@milliken.com.
