Wetting and Dispersing Additive for Boosting Color Performance ┃ Stabilizing Pigments and Fillers with Polar Surfaces

Borchi® Gen 0650 is an anionic, APEO- and VOC-free wetting and dispersing agent for water- and solvent-based coating systems. This additive for better color performance is highly effective in stabilizing pigments and fillers with very polar surfaces. These include titanium dioxide (TiO2), iron oxide, and hydrophilic organic pigments.

 

Benefits of Dispersing Agents for Color Improvement in Pigments and Fillers with Polar Surfaces

Inorganic pigment surfaces are high in polarity. However, pigments that have very polar surfaces are difficult to wet without assistance from additives. Wetting and dispersing agents are required to effectively wet, disperse, and stabilize these pigments.

Borchi® Gen 0650 provides low viscosity dispersions to stabilize TiO2, iron oxide, and hydrophilic organic pigments. It is particularly effective in enhancing colors of tinted white and clear alkyd-based coatings.

 

Applications

Borchi® Gen 0650 is ideal for decorative and protective and marine and decorative coatings, as well as printing inks.

In adhesive formulations that utilize DIDP plasticizers, Borchi® Gen 0650 effectively disperses TiO2 pigments.

 

settling competitive dispersing additive for tio2 in adhesives vs borchigen 0650

          Control                                 Borchi® Gen 0650

Borchi® Gen 0650 shows better stability than the control dispersant in an adhesive solution with 70 % TiO2 concentration after two weeks at 50 °C

 

bright white color borchers dispersing additive for tio2 in adhesives

         Control                     Borchi® Gen 0650

Better white color development is achieved with Borchi® Gen 0650 dispersant in a TiO2 adhesive formulation compared to the control dispersant

  • Physical Characteristics

    Appearance High-viscous, colorless to yellow liquid 
    Non-volatile content 100 % 
    pH 6 – 7.5 (aqueous solution 10 %) 
    Density 1.02 – 1.06 g/cm3 
    Viscosity Max. 3,000 mPa.s 
    Solvent(s) NA 

  • Features

    • Specifically designed for stabilizing fillers and pigments with polar surfaces like titanium dioxide, iron oxides and hydrophilic organic pigments
    • May significantly improve the color of tinted white and clear alkyd-based coatings
    • Low viscosity dispersions

  • Applications

    • Coatings
      • Protective and Marine
      • Decorative
    • Printing inks
    • Adhesives and sealants

  • Dosage

    Recommended amounts of Borchi® Gen 0650 in % (supply form) based on pigment content:

    • Titanium dioxide: 1 – 4 %
    • Inorganic pigments: 5 – 15 %
    • Organic pigments: 10 – 30 %

     

    The amount depends on the particle size and surface area of the pigment. The exact dosage should be experimentally determined.

  • Storage

    Protect from the effects of weather and store at temperatures between 5 and 30 °C. Slight turbidity may occur during storage but this does not affect the performance of the product. Once opened, containers should be resealed immediately after each removal of the product.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].

Wetting and Dispersing Products
View All Wetting and Dispersing Products