| Appearance | Liquid, yellow-orange |
| Non-volatile content | 100 % |
| pH | 8 – 10 |
| Density | 1.06 – 1.10 g/cm3 |
| Viscosity | approx. 50,000 cPs |
| Solvent(s) | NA |
Depending on the pigment grade, the recommended dosage is:
The exact dosage should be experimentally determined through a ladder study. Borchi® Gen 0755 should be added to the mill base before adding the pigment.
Protect from the effects of weather and store at temperatures between 15 and 30 °C. Turbidity and flocculation may occur if Borchi® Gen 0755 is exposed to temperatures below 15 °C. This effect is reversible and does not affect its potency. Warm the material to room temperature and mix well before using. If its viscosity has also increased and it is difficult to handle the material must be heated to 50 °C to return the viscosity to normal. Once opened, containers should be resealed immediately after each removal of the product.
Please refer to our safety data sheet for information relating to product safety.
For chemical inventory status, please review section 15 of the current SDS.
Click here to access the SDS portal.
For additional regulatory information, please contact regulatory@milliken.com.
