| Metal content | Bi, Li |
| Non-volatile content | 60 – 75 % ISO 3251 (2g, 3 h, 105 °C) |
| Viscosity | Max. 1000 mPa·s ISO 3219 (A) (20 °C) |
| Specific gravity | N/A |
| Density | 0.98 – 1.02 g/cm³ DIN 51757 (20 °C) |
Our experience has shown the recommended addition rate of Borchi® Kat 0243 to be between 0.02 and 0.15 % product,
calculated on solid binder. The exact amount depends on the used binder and should be determined by means of
preliminary trials. Borchi® Kat 0243 can be added as supplied or solved in any suitable solvent (e.g. 10 % in xylene) to the
polyol component of the coating system. The solution has to be homogenized by stirring. Borchi® Kat 0243 is also soluble in
polar solvents and solvents of medium polarity. However, these solutions are only stable for a limited period of time.
Protect from the effects of weathering and store at temperatures below 50 °C. Once opened, containers should be resealed immediately after each removal of the product.
Please refer to our safety data sheet for information relating to product safety.
For chemical inventory status, please review section 15 of the current SDS.
Click here to access the SDS portal.
For additional regulatory information, please contact regulatory@milliken.com.
