Borchi^® Kat 2115

• • Neodecanoate mixed metals that can be used to replace DBTDL, DOTL, and amine-based catalysts

   

  • Extended pot-life and higher hardness compared to DBTDL and leading bismuth catalysts

  

  

   

  • 2-ethylhexanoate-free (2-EH) for improved labeling over traditional bismuth octoate

   

  • Additional Benefits:
    • Maintain outstanding corrosion resistance
    • No impact on achieving high gloss finishes
    • Will not contribute to yellowing
    • Comparable dry times to tin-free bismuth technology

   

  

   

• Solvent-based and solvent-free pigmented and clear one- and two-component polyurethane coatings
  • Automotive Refinish
  • General Industrial
  • Coil
• Suitable for polyurethane foams

The recommended addition rate of Borchi^® Kat 2115 in polyurethane coatings is, according to our experience, between 0.02 and 0.15% product, calculated on solid binder. The exact amount depends on the used binder and should be determined by means of preliminary trials. Borchi^® Kat 2115 can be added either in the supply form or diluted (e.g., in butyl acetate) to the polyol component of the coating system. Borchi^® Kat 2115 should not be diluted below 10% of the supply form, since those solutions are only stable for a limited period of time.

Protect from the effects of weathering and store at temperatures between 5 and 30 °C. Once opened, containers should be resealed immediately after each removal of the product.

Please refer to our safety data sheet for information relating to product safety.

Download the starting point formulation for a high solids white topcoat for metal.

Click here for Americas tin-free catalyst offering.

Click here for Rest of World tin-free catalyst offering.