Silicone-free air release agent for solvent-based and solvent-free paint systems

  • Physical Characteristics Features

    AppearanceClear, very low viscous, colorless to yellowish liquid
    Non-volatile content37 % ASTM D1644
    pHN/A
    Density0.8 – 0.9 g/cm3 DIN 51757 (A) (20 °C)
    ViscosityN/A
    ColorAPHA: 35 ISO 6271
    Flash Point43 °C ASTM D93
    Refractive Index1.500 – 1.514 (25°C)
    Turbiditymax 10 NTU
    Solvent(s)Aromatic petroleum solvent

  • Features

    • Helps eliminate flow defects and craters caused by air entrapment
    • Efficacy is dependent upon binder type, mixing conditions and application method used
    • Can be used in all non-polar solvent-containing and solvent-free single and multi-component parts

  • Applications

    • Non-polar paints
      • Solvent-containing
      • Solvent-free
      • Single-component
      • Multi-component

  • Dosage

    Borchi® Gol 1470 must be added to the mill base or with sufficient mixing for complete incorporation. The recommended dosage is 0.05 – 0.50 % of the total weight of the formulation depending upon the binder system. The exact dosage should be experimentally determined.

  • Storage

    Protect from the effects of weathering and store at temperatures below 50 °C. Once opened, containers should be resealed immediately after each removal of the product.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

     

    Read our blog for more information on choosing the right flow and leveling agent.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].