| Appearance | Liquid, yellow-orange |
| Non-volatile content | 83 – 87 % |
| pH | 8 – 10 |
| Density | 1.08 – 1.12 g/cm3, 20 °C |
| Viscosity | Max. 6000 mPa.s |
| Solvent(s) | Methoxypropyl acetate |
Depending on the pigment grade, the recommended dosage is 20 – 35 % active dispersant on pigment. The exact dosage should be experimentally determined through a ladder study. Borchi® Gen 1251 should be added to the mill base before adding the pigment.
Protect from the effects of weather and store at temperatures between 5 and 30 °C. At temperatures below 15 °C turbidity and flocculation may occur. This effect is reversible and does not influence the product efficiency, so warm up to room temperature and mix well before use. Once opened, containers should be resealed immediately after each removal of the product.
Please refer to our safety data sheet for information relating to product safety.
For chemical inventory status, please review section 15 of the current SDS.
Click here to access the SDS portal.
For additional regulatory information, please contact regulatory@milliken.com.
