| Appearance | Opalescent, high-viscous liquid | |
| Non-volatile content | 22 – 27 % ISO 3251 (2g, 3h, 105 °C) | |
| pH | 5.5 – 8.0 | |
| Density | 1.02 – 1.07 g/cm3 DIN 53217 (23 °C) | |
| Viscosity | Max. 15000 mPa.s ISO 3219 (A) (23 °C) |
|
| Solvent(s) | Water, DPM, 1,2 Propanediol | |
The best incorporation method is to add it after the pigment/filler dispersion stage but prior to being let down. Under low shear mixing conditions, a pre-dilution in water or a mixture of water/propylene glycol may be necessary for complete incorporation. The exact dosage should be experimentally determined.
Protect from the effects of weathering and store at temperatures between 5 and 30 °C. Once opened, containers should be resealed immediately after each removal of the product. Transport or storage may cause a foam on the surface or a slight phase shift. A homogenization of the product is necessary to recover a normal aspect before use without a negative impact on the effectiveness of the product.
The product is not subject to the German Regulation on hazardous material and no labelling is required in accordance with the EEC directives. It is not dangerous cargo. Please refer to our safety data sheet for information relating to product safety.
For chemical inventory status, please review section 15 of the current SDS.
Click here to access the SDS portal.
For additional regulatory information, please contact regulatory@milliken.com.
