| Appearance | Viscous flowing emulsion |
| pH | 6-8 |
| Viscosity (ISO 3219 (A) 20°C) | max 2000 mPa.s |
| Flash point | above 120°C |
Shake or roll the container before using. Mix
the Borchi® Burst DFS 900 with water in a 1:3 ratio (1-part defoamer to 3 parts water).
Borchi® Burst DFS 900 should be added at 0.3-0.8%. It is suggested to do a ladder study to determine the optimal level.
Protect from the effects of weathering and store at temperatures below 50 °C. Once opened, containers should be resealed immediately after each removal of the product.
Please refer to our safety data sheet for information relating to product safety.
For chemical inventory status, please review section 15 of the current SDS.
Click here to access the SDS portal.
For additional regulatory information, please contact regulatory@milliken.com.
