Zirconium drier for VOC-reduced and high solids coatings

  • Physical Characteristics

    AppearanceClear, low-viscous, colorless to yellow liquid
    Metal contentZr: 11.70 – 12.30 % ISO 4619
    Non-volatile contentNA
    Viscosity15 – 85 mPa.s (20°C) ISO 3219 (A)
    Specific gravityNA
    Density1.040 – 1.080 g/cm³ DIN 51757 (20 °C)
    SolventFatty acid ester

  • Features

    • Widely used secondary drier with cobalt, manganese and calcium
    • Based on metal salts of 2-ethylhexanoic acid (octoates) or their isomers
    • Promotes through-drying primarily by the formation of coordination bonds
    • Better properties in terms of color, yellowing and stability compared to other secondary driers

  • Applications

    • VOC-reduced and high-solid coatings

  • Dosage

    In our experience, the percentage addition of zirconium, calculated on the metal content per solid binder, is approx. 0.05 – 0.30 %. The exact amount required depends on the binder used and should always be determined in preliminary trials.

  • Storage

    Protect from the effects of weathering and store at temperatures between 5 and 30 °C.

    Once opened, containers should be resealed immediately after each removal of the product.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].

Driers Products
View All Driers Products