Lead-free combination drier for solvent-based paint systems

  • Physical Characteristics

    AppearanceClear, low-viscous, violet liquid
    Metal contentCo: 5.80 – 6.20 %

    Zr: 8.80 – 9.20 %

    Total: 14.60 – 15.40 %

    DN 55901

    Non-volatile content60.00 – 73.00 % ISO 3251 (2g, 3h, 105°C)
    Viscosity80 – 280 mPa.s (20°C) ISO 3219 (A)
    Specific gravityNA
    Density1.060 – 1.100 g/cm³ DIN 51757 (20 °C)
    SolventWhite-spirit containing <1 % aromatics

  • Features

    • The balanced ratio of the metals cobalt and zirconium in Octa-Soligen® 69 yields optimum results in respect of initial- and through-drying
    • Low viscosity
    • Readily meterable
    • Cloudiness and precipitation do not occur

  • Applications

    • Binder systems that dry by oxidation, including:
      • White and light-colored paints

  • Dosage

    Experiments have shown that the necessary amount of Octa-Soligen® 69 should be between 0.25 and 1.00% relative to the solid binder, depending on the binder and the pigment system. This is equivalent to a cobalt content of 0.015 to 0.060 %.

    When using pigments which retard the drying process such as carbon black or toluidine red, a higher addition rate or special stabilisation may be necessary. Suitable stabilisers are Octa-Soligen® Barium 12.5 and in particular Octa-Soligen® Calcium 10 which, in conjunction with cobalt and zirconium, further accelerates the drying process and provides long-term drier stability.

  • Storage

    Protect from the effects of weathering and store at temperatures below 50 °C.

    Once opened, containers should be resealed immediately after each removal of the product.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].

Driers Products
View All Driers Products