Combination drier for oxidatively drying alkyd resins

  • Physical Characteristics

    AppearanceClear, middle-viscous violet liquid
    Metal contentCo: 0.95 – 1.05 %

    Zn: 3.10 – 3.30 %

    Zr: 7.00 – 7.40 %

    Total: 11.05 – 11.75 % DN 55901

    Non-volatile contentNA
    Viscosity50 – 190 mPa·s ISO 3219 (A) (20 °C)
    Specific gravityNA
    Density1.010 – 1.050 g/cm³ DIN 51757 (20 °C)
    SolventWater dispersible oil

  • Features

    • Multi-metal mixture for drying light-colored water-based paints
    • Can be easily incorporated in aqueous coating systems
    • Metal synergies in the product allow keeping the cobalt content to a minimum, thus reducing discoloration and yellowing

  • Applications

    • Medium- and long-oil alkyds applied at a wet film thickness below 100 microns

  • Dosage

    In general, dosage levels in aqueous systems are higher than those used in solventborne systems.

    The recommended addition rate is 4 to 7 % Octa-Soligen® 144 aqua (supply form), calculated on solid binder.

  • Storage

    Protect from the effects of weathering and store at temperatures between 5 and 30 °C.

    Once opened, containers should be resealed immediately after each removal of the product.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].

Driers Products
View All Driers Products