| Appearance | Clear, low-viscous, violet liquid |
| Metal content | Co: 5.80 – 6.20 %
Zr: 8.80 – 9.20 % Total: 14.60 – 15.40 % DN 55901 |
| Non-volatile content | 60.00 – 73.00 % ISO 3251 (2g, 3h, 105°C) |
| Viscosity | 80 – 280 mPa.s (20°C) ISO 3219 (A) |
| Specific gravity | NA |
| Density | 1.060 – 1.100 g/cm³ DIN 51757 (20 °C) |
| Solvent | White-spirit containing <1 % aromatics |
• The balanced ratio of the metals cobalt and zirconium in Octa-Soligen® 69 yields optimum results in respect of initial- and through-drying
• Low viscosity
• Readily meterable
• Cloudiness and precipitation do not occur
Experiments have shown that the necessary amount of Octa-Soligen® 69 should be between 0.25 and 1.00% relative to the solid binder, depending on the binder and the pigment system. This is equivalent to a cobalt content of 0.015 to 0.060 %.
When using pigments which retard the drying process such as carbon black or toluidine red, a higher addition rate or special stabilisation may be necessary. Suitable stabilisers are Octa-Soligen® Barium 12.5 and in particular Octa-Soligen® Calcium 10 which, in conjunction with cobalt and zirconium, further accelerates the drying process and provides long-term drier stability.
Protect from the effects of weathering and store at temperatures below 50 °C.
Once opened, containers should be resealed immediately after each removal of the product.
Please refer to our safety data sheet for information relating to product safety.
For chemical inventory status, please review section 15 of the current SDS.
Click here to access the SDS portal.
For additional regulatory information, please contact regulatory@milliken.com.
