Home | Products | Borchi® Guard T

Borchi® Guard T

Oxime-Free and Amine-Free Anti-Skinning Agent for Solvent-Based Alkyds

Borchi® Guard T is an oxime-free and amine-free anti-skinning agent for oxidatively cured solvent-based coating systems and pigment pastes.   Borchi Guard T oxime free anti skinning agent for alkyds
The Problem with Oximes
While oxime-based additives have been commonly used to prevent skinning, they have faced growing regulatory concerns in recent years.   Methyl ethyl ketoxime (MEKO) levels at ≥ 0.1% require Carcinogenic 1B labeling in the European Union (EU). Canada also has a Code of Practice that limits MEKO in indoor paints.   2-Pentanone oxime (2PO or MPKO) is anticipated to receive receive GHS Carcinogenic 2 labeling in the EU.    
A High-Performing, Oxime-Free Alternative
Borchi® Guard T helps formulators prevent skinning in alkyd paints while reducing impact from current and expected regulations.   Future-proof against both oxime and cobalt regulatory concerns by formulating Borchi® Guard T with Borchi® OXY-Coat cobalt-free high-performance catalysts for solvent-based short, medium, and long oil alkyd coatings or Borchi® Dragon high-performance cobalt-free catalysts for solvent-based high solids, long oil alkyd coatings.   In a solventborne long oil alkyd using Borchi® OXY-Coat, Borchi® Guard T provided 7x longer skin prevention at 33% lower dosage than a 2PO alternative.   faster dry times at reduced level compared to oxime alternative with Borchi Guard T oxime free anti skin for alkyds     Other oxime-free anti-skins include:   Click here for more performance results in our sales tool.

Physical Characteristics

 

Appearance Clear, colorless to light yellow liquid ISO 4619

Viscosity

Max. 50 mPa·s ISO 3219 (A)
Density

1.055 – 1.095 g/cm3 DIN 51757

Features

  • Improves the storage stability of solvent-based, oxidatively cured coating systems, printing inks, and pigment pastes by preventing skin formation on the surface while the material is still in the container
  • Efficient at low dosages, achieves excellent dry times across a variety of primary driers, and maintains excellent storage stability with minimal loss of dry
  • Controls surface‑dry retardation and keeps the film open longer, allowing deeper oxygen penetration into lower film layers. This promotes thorough drying and improves flow and leveling properties

Applications

  • Architectural and industrial solvent-based systems, oxidatively cured coatings
  • High solids, oxidatively cured systems

Dosage

Borchi® Guard T can be added to the system at any stage of the manufacturing process but it is highly recommended to add it as the final addition after driers. The amount of Borchi® Guard T depends on the type of binder and quantity of the driers used.

Recommended dosage:  

The recommended dosage in the finished system is typically in the range of 0.2–0.9%, depending on the binder type and the amount of driers used. 

When Borchi® Guard T is used as a replacement for 2PO or MEKO, a dosage level of approximately 50–80% of the current 2PO or MEKO concentration should be taken as a guideline. Fine adjustment should be carried out based on the specific formulation.

Storage

Protect from the effects of weathering and store at temperatures between 5 and 30 °C. Once opened, containers should be resealed immediately after each removal of the product.

Safety

For further safety information please refer to our safety data sheet.

add to sample order
Download Data Sheet
Availability : Americas, EMEA
Media : Solvent-based
Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact regulatory@milliken.com.

Anti Skinning / Anti Oxidants Products

View All Anti Skinning / Anti Oxidants Products »