Polyether modified polysiloxane for improved flow and slip properties in solvent- and water-based coatings systems, 100 % active, VOC-free

  • Physical Characteristics

    AppearanceLiquid, yellow
    Non-volatile contentN/A
    pHN/A
    Density1.03 g/cm³ DIN 51757 (20°C)
    Viscosity800 – 1000 mPa.s DIN 53015 (23 °C)
    ColorHazen: Max. 150 ISO 6271
    Refractive Index1.448 – 1.452 DIN 51423 (23 °C)
    Solvent(s)N/A

  • Features

    • Eliminates craters and uneven film applications
    • Increases and improves slip properties with no recoatability issues
    • Very versatile with good efficiency in various baking enamels

  • Applications

    • Baking enamels based on
      • Alkyd resins
      • Alkyd / amino resin combinations
      • Acrylic resins
      • Acrylic / amino resin combinations

  • Dosage

    The recommended dosage is 0.05 % to 0.50 % of the total weight of the formulation depending upon the binder system. The exact dosage should be experimentally determined. No recoatability issues are expected when used at the recommended low addition rate levels.

  • Storage

    Protect from the effects of weathering and store at temperatures between 5 and 30 °C. Once opened, containers should be resealed immediately after each removal of the product to avoid exposure to water and atmospheric moisture as much as possible. Under no circumstances should the product be repacked from its original packing container

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :
  • Europe : EINECS
  • Switzerland : EINECS
  • USA : TSCA
  • Canada : DSL
  • Australia : AICS
  • New Zealand : NZIoC
  • China : IECSC
  • Korea : ECL
  • Taiwan : NECI
  • Philippines : PICCS
Flow & Leveling Products
View All Flow & Leveling Products