| Appearance | Light yellow liquid |
| Metal content | Zr: 11.80 – 12.20 % |
| Non-volatile content | 80.00 % (NVM D1644) |
| Color | Gardner 8 (ASTM D 1544) |
| Specific gravity | 1.010 – 1.070 (25°C, D1963) |
| Weight per gallon | 8.41 – 9.41 (lb/gallon) |
• Highly efficient secondary drier
• Promotes through-drying properties and is used in combination with cobalt, manganese, Borchi® OXY-Coat and other surface driers
• Improves through dry in oxidatively cured coatings primarily by the formation of coordinative bonds when hydroxyl and carboxyl groups are present
• In comparison to other secondary driers, zirconium has better properties in terms of color, yellowing and stability
• Water- and solvent-based systems
In conventional alkyd formulations, the Zirconium drier addition is between 0.05 – 0.30 % metal based on the vehicle solids of the coating and will vary depending upon the composition of the binder.
Protect from the effects of weathering and store at temperatures below 50 °C. Once opened, containers should be resealed immediately after each use
Please refer to our safety data sheet for information relating to product safety.
For chemical inventory status, please review section 15 of the current SDS.
Click here to access the SDS portal.
For additional regulatory information, please contact regulatory@milliken.com.
