Cobalt drier for solvent-based paint systems

  • Physical Characteristics

    AppearanceClear, low-viscous, blue-violet liquid
    Metal contentCo: 9.80 – 10.20 % ISO 4619
    Non-volatile content48.00 – 58.00 % ISO 3251 (2g, 3h, 105°C)
    ViscosityMax. 200 mPa.s (20°C) ISO 3219 (A)
    Specific gravityNA
    Density0.940 – 0.980 g/cm³ DIN 51757 (20 °C)
    SolventNA

     

  • Features

    • Based on metal salts of neodecanoic acid (neodecanoates)
    • Catalyzes redox reactions and even small additions result in the dissociation of autoxidant hydroperoxides and to a change in valency from Co2+ to Co3+
    • Initiates rapid surface drying

  • Applications

    • All oxidative systems, including:
      • Architectural paints
      • Industrial coatings
      • Stains
      • Varnishes
      • Oil-based inks
      • Artists’ oil paints

  • Dosage

    In conventional alkyd formulations, the cobalt amount is in the range of 0.03 to 0.08 % metal, calculated on the solid binder. In paints and varnishes Borchers®Deca Cobaltmostly is combined with Borchers®Deca Zirconium and Octa-Soligen®Calcium 10, basic. In printing inks, a combination of Borchers® Deca Cobaltand Borchers®Deca Manganese is recommended. The cobalt amount is in the range of 0.03 to 0.05 % metal, calculated on the solid binder. Irrespective of these guidelines, the addition should always be determined in preliminary trials.

  • Storage

    Protect from the effects of weathering and store at temperatures below 50 °C. Once opened, containers should be resealed immediately after each removal of the product.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].