Silicone-Free Substrate Wetting Agent

Borchi® Gol 1375 is a silicone-free substrate wetting agent for paints and coatings. This flow and leveling agent is VOC- and APEO-free and can be used in solvent- and water-based systems.

 

Benefits of Silicone-Free Substrate Wetting Agents

Borchi® Gol 1375 is an additive based on nonionic and amphoteric surfactants that reduces surface tension and has low foaming tendencies in coating formulations. This flow and leveling agent shows a high affinity to hydrophobic surfaces.

 

silicone free substrate wetting / flow and leveling agent additive

     Reference                                                           Borchi® Gol 1375

Borchi® Gol 1375 shows improved substrate wetting on an oil-contaminated surface

 

Other Substrate Wetting Agents from Borchers

 

Applications

Ideal applications include general industrial, decorative, and wood coatings.

  • Physical Characteristics

    AppearanceClear liquid
    Non-volatile content84 – 90 % ISO 3251 (2g, 1h, 105 °C)
    pH7 (20 °C)
    Density0.980 – 1.00 g/cm3 ISO 2811 (25 °C)
    Viscositymax. 110 mPa.s ASTM D 1638 (25 °C)
    ColorGardner: Max. 3 ISO 4630
    Refractive Index1.44 – 1.46 DIN 51423 (25 °C)
    Solvent(s)N/A

     

  • Features

    • Shows high affinity to hydrophobic surfaces
    • Reduces surface tension
    • Improves the wetting process
    • Low-foaming tendencies in formulations
    • VOC-free
    • APEO-free

  • Applications

    • Coatings
      • General Industrial
      • Decorative
      • Wood

  • Dosage

    Borchi® Gol 1375 used for the substrate wetting should be added to the finished system. The recommended dosage is 0.05 to 1.50 % as supplied on total formulation. The recommended level can be used for orientation. The optimal dosage is determined through a series of laboratory tests.

  • Storage

    Protect from the effects of weathering and light. Store at temperatures between 5 and 30°C. Once opened, containers should be resealed immediately after each removal of the product. Separation of turbidity may occur at temperatures below 10 °C. This process is reversible and does not affect the product quality. Coloration may occur at temperatures over 40 °C.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

     

    Read our blog for more information on choosing the right flow and leveling agent.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].