Calcium drier for VOC-reduced and high-solid coatings

  • Physical Characteristics

    AppearanceClear, high-viscous, yellowish to brown liquid
    Metal contentCa: 6.80 – 7.20 % ISO 4619
    Non-volatile contentNA
    ViscosityMax. 5000 mPa.s (20°C) ISO 3219 (A)
    Specific gravityNA
    Density1.000 – 1.040 g/cm³ DIN 51757 (20 °C)
    SolventFatty acid ester

  • Features

    • Yields synergistic effects in combination with primary driers such as cobalt and manganese and with secondary driers such as zirconium
    • Prevents adsorption of the primary driers at the surface of pigments and extenders, thus stabilizing drying power
    • Promotes pigment wetting and film gloss

  • Applications

    • Solvent-based systems based on alkyds and epoxy esters that dry by oxidation

  • Dosage

    In our experience, the percentage addition of calcium, calculated on the metal content relative to solid binder, is approx. 0.03 – 0.30 %. The exact amount required depends on the binder used and should always  be determined in preliminary trials.

    It is recommended to add all or part of Octa-Soligen® Calcium during the grinding step to improve pigment wetting. It can also be incorporated at the end of the process at the same time than other driers.

  • Storage

    Protect from the effects of weathering and store at temperatures between 5 and 30 °C.

    Once opened,containers should be resealed immediately after each removal of the product.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].

Driers Products
View All Driers Products