Polyether modified polysiloxane for improved flow and leveling properties and surface smoothness in solvent- and water-based coatings systems, 100 % active, VOC-free

  • Physical Characteristics

    AppearanceLiquid, yellow
    Non-volatile contentNA
    pH600 – 800 mPa·s
    Density1.025 – 1.050 g/cm3
    ISO 2811 (20 °C)
    Viscosity600 – 800 mPa.s DIN
    53015 (23 °C)
    ColorHazen: Max. 450 ISO
    6271
    Refractive Index1.445 – 1.449 DIN
    51423 (23 °C)

  • Features

    • Improves surface smoothness by reducing orange peel
      and preventing the formation of craters
    • Effective flow promoter
    • Good compatibility with a wide variety of binders

  • Applications

    • Can be used in a wide variety of binders
      • Particularly suitable in two component systems based on Desmodur® / Desmophen® resins

  • Dosage

    The recommended dosage is 0.05 % to 0.50 % of the total weight of the formulation depending upon the binder system. The exact dosage should be experimentally determined. Intercoat adhesion failures are not generally observed when used at the
    recommended levels.

  • Storage

    Protect from the effects of weathering and store at temperatures between 5 and 30 °C. Once opened, containers should be
    resealed immediately after each removal of the product to avoid exposure to water and atmospheric moisture as much as
    possible. Under no circumstances should the product be repacked from its original packaging container.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

     

    Read our blog for more information on choosing the right flow and leveling agent.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].

Flow & Leveling Products
View All Flow & Leveling Products