Control Borchi® Boost
| Appearance | Liquid, yellow-orange |
| Non-volatile content | 100 % |
| pH | 8 – 10 (aqueous solution 10 %) |
| Density | 1.06 – 1.10 g/cm3 |
| Viscosity | Max. 50,000 cPs |
| Solvent(s) | NA |
• Improves color acceptance in medium to low polarity
systems
• Strengthens tints with organic pigment dispersions and
carbon blacks
• Reduces or eliminates color rubout
• 100% solid
• Can be incorporated as a post-add to the basecoat
• APEO- and VOC-free
• Solvent basecoats
• Organic pigment dispersions
• Carbon blacks
1 – 3 % on basecoat.
Protect from the effects of weather and store at temperatures between 15 and 30 °C. Turbidity and flocculation may occur if Borchi® Boost 570WS is exposed to temperatures below 15 °C. This effect is reversible and does not affect its potency.
Warm the material to room temperature and mix well before using. If its viscosity has also increased and it is difficult to handle the material must be heated to 50 °C to return the viscosity to normal. Once opened, containers should be resealed immediately after each removal of the product.
Please refer to our safety data sheet for information relating to product safety.
For chemical inventory status, please review section 15 of the current SDS.
Click here to access the SDS portal.
For additional regulatory information, please contact regulatory@milliken.com.
